FEATURES

klsjdajsdhaksjdhasj

ROOMY CAB WITH AC/HEAT

Comes standard with side mirrors, front washer/wiper, interior lighting, air conditioning and heat, flat platform and rubber mat.

klsjdajsdhaksjdhasj

4WD (FRONT WHEEL MECHANICAL ASSIST)

Go from 2WD to a 4WD with a simple move of a switch.

klsjdajsdhaksjdhasj

INDEPENDENT PTO

Easiest PTO to operate that can be turned on or off with a switch. Standard 540, 750, 1,000 RPM and shiftable ground speed PTO.

klsjdajsdhaksjdhasj

STANDARD FULLY SYNCHRONIZED TRANSMISSION & 40X40 POWER SHUTTLE

Change gears without having to stop. 40 forward / 40 reverse gear transmission provides more operating speeds than others in its class for superior control, precision and safe operations for virtually any application. Includes creeper speed and hi/low button.

klsjdajsdhaksjdhasj

STANDARD 3 SETS OF REMOTE VALVES WITH DETENT

Adds functionality and improves ease of use by allowing attachment of hydraulically controlled implements without the high, additional costs like others in its class to add the remotes as options.

klsjdajsdhaksjdhasj

EXTENDABLE LOWER LINKS

With secondary Hydraulic Cylinder allows easier attachment of a wide variety of Category 2 implements with a 8,378 lb lift capacity.

klsjdajsdhaksjdhasj

STANDARD TILT & POWER STEERING

Makes turning easier, improves control and reduces fatigue.

klsjdajsdhaksjdhasj

FENDER MOUNTED JOYSTICK FOR FRONT END LOADER

Easily accessible for maximum comfort and convenience.

klsjdajsdhaksjdhasj

-POINT HITCH WITH HYDRAULIC AUTO-LIFT, DRAFT & POSITION CONTROL

Most convenient way to operate your 3-Point Hitch.

klsjdajsdhaksjdhasj

STANDARD REAR WORK LIGHT

Adjustable light to improve visibility where you need it.

klsjdajsdhaksjdhasj

STANDARD DRAW BAR

Increases the usefulness of the tractor without the additional optional cost.

klsjdajsdhaksjdhasj

7 PIN CONNECTOR

Provides electrical power for implements when needed.

klsjdajsdhaksjdhasj

LARGE FUEL TANK

30.4 gallon capacity provides long operation times.

klsjdajsdhaksjdhasj

TIER 4 ENGINE

Eco friendly TIER 4 engine provides more horsepower with less fuel consumption and emissions. The pre-heat starting aid helps starting the engine all the way down to -4F.

klsjdajsdhaksjdhasj

EASY OPEN ONE-PIECE HOOD

Provides accessibility for easy maintenance.

klsjdajsdhaksjdhasj

MODERN ERGONOMIC DESIGN

Ergonomically designed for comfort.

klsjdajsdhaksjdhasj

PREMIUM SEAT

The air suspension provides a comfortable ride. Swivel the seat up to 20 degrees to reduce the strain when looking rearward.

klsjdajsdhaksjdhasj

EASY OPEN ONE-PIECE HOOD

Provides accessibility for easy maintenance.

SPECIFICATIONS

ENGINE

  • Type: 4-cylinder, CRDI, Water-cooled
  • Model (Tier 4 Final): F5G
  • Engine HP (Gross): 100.6
  • PTO HP: 85.5
  • Rated Speed (RPM): 2,200
  • Displacement (cu. in.): 206.7
  • Fuel Tank Capacity (gal): 30.4

 

DRIVE TRAIN

  • Transmission: Power shuttle
  • No. of Speeds: 40 forward / 40 reverse
  • Forward Speed (mph): 0.01 ~22.6

 

PTO

  • Type: Independent / Ground Speed PTO
  • Rear (rpm): 540/750/1,000

HYDRAULIC SYSTEM

  • Control System: Position / Draft
  • Implement Pump (gpm): 15.7
  • Steering Pump (gpm): 6.5
  • Total Flow (gpm): 22.2
  • Category, 3 Point Hitch: Category 2
  • Hitch Lift Capacity (lbs): 8,378
  • Remote Ports: 3 Pairs (Front), 3 Pairs (Rear)

 

DIMENSIONS

  • Overall Length, Frame to Link (in.): 152.2
  • Overall Width with Tires (in.): 78.7
  • Wheelbase (in.): 90
  • Height to Top (in.): 105.4

 

TIRE SIZE

  • Front: 13.6 – 24
  • Rear: 18.4 – 34

 

WEIGHT

  • Total Weight Without Ballast (lbs.): 7,714

OPTIONS

​Front Weight Kit – 88 lbs. x 8
Rear Weight Kit – 99 lbs x 4
Beacon lamp
Mud guards

ATTACHMENTS

LL8100

  • Maximum Lift Height (in): 139.9
  • Clearance with Attachment Dump (in): 103.3
  • Reach at Maximum Height (in): 23.4
  • Maximum Dump Angle (deg.): 57
  • Maximum Rollback Angle (deg.): 46
  • Digging Depth (in): 4.6
  • Overall Height in Carry Position (in): 68.8
  • Lift Capacity (@ Pivot Pin) (lbs.): 5,139
  • Breakout Force (@ Pivot pin) (lbs.): 5,313
  • Approx. Weight (Loader w/o Bucket) (lbs.): 1,660

LB2106

Digging Depth (in): 89.7

Reach from centerline of swing Pivot (in): 125.2

Loading Height (in): 72.4

Swing Arc (deg.): 180

Transport Height (in): 83.5

Bucket Rotating (deg.): 180

Stabilizer Spread(Down position) (in): 68.7

Stabilizer Spread(Up position) (in): 46.5

 

Bucket Digging force (lbs): 2,673

 

COMPATIBLE WITH

MT350E-50HP

MT345HE-45HP

MT345E-45HP

 

 

 

LB1107

​Digging Depth (in.): 77.8

Reach from Centerline of Swing Pivot (in.): 144.9

Loading Height (in.): 59.6

Swing Arc (deg.): 140

Transport Height (in.): 74.7

Bucket Rotating (deg.): 169.4

Stabilizer Spread (Down Position) (in.): 78.6

Stabilizer Spread (Up Position) (in.): 53.2

Bucket Digging Force (lbs.): 2,097

Shipping Weight (lbs.): 873

 

COMPATIBLE WITH

MT122-21.5HP

MT125-24.7HP

 

 

 

LB1104

Digging Depth (in): 79.3

Reach From centerline of swing Pivot (in): 113.3

Loading Height (in): 56.9

Swing Arc (deg.): 150

Transport Height (in): 75.2

Bucket Rotation (deg.): 163

Stabilizer Spread (Down Position) (in): 87.7

Stabilizer Spread (Up Position) (in): 55.7

Bucket Digging force (lbs): 2,096

 

COMPATIBLE WITH

XJ2025-24.4HP

XJ2025H-24.4HP

 

 

 

LB1105

Digging Depth (in): 76.3

Reach From centerline of swing Pivot (in): 113.1

Loading Height (in): 63.6

Swing Arc (deg.): 180

Transport Height (in): 77.2

Bucket Rotation (deg.) :180

Stabilizer Spread (Down Position) (in): 68.7

Stabilizer Spread (Up Position) (in): 46.4

Bucket Digging force (lbs.): 2,817

 

COMPATIBLE WITH

MT230E-30HP

MT235E-35HP

MT235HE-35HP

MT240E-40HP

MT240HE-40HP

 

 

 

LB1106

Digging Depth (in): 76.3

Reach From centerline of swing Pivot (in): 113.1

Loading Height (in): 63.9

Swing Arc (deg.): 180

Transport Height (in): 77.2

Bucket Rotation (deg.): 180

Stabilizer Spread (Down Position) (in): 68.7

Stabilizer Spread (Up Position) (in): 46.4

Bucket Digging force (lbs): 2,817

 

COMPATIBLE WITH

MT225E-24.6HP

 

 

 

LB2102

Digging Depth (in): 89.7

Reach from centerline of swing Pivot (in): 125.1

Loading Height (in): 72.4

Swing Arc (deg.):180

Transport Height (in): 83.5

Bucket Rotating (deg.): 180

Stabilizer Spread(Down position) (in): 68.7

Stabilizer Spread(Up position) (in): 46.4

Bucket Digging force (lbs.): 2,679

 

 

LB2103

Digging Depth (in): 89.7

Reach from centerline of swing Pivot (in): 125.1

Loading Height (in): 72.4

Swing Arc (deg.): 180

Transport Height (in): 83.5

Bucket Rotating (deg.): 180

Stabilizer Spread(Down position) (in):68.7

Stabilizer Spread(Up position) (in): 46.4

Bucket Digging force (lbs): 2,679

 

 

LB2104

Digging Depth (in): 89.8

Reach from centerline of swing Pivot (in):125.2

Loading Height (in): 72.4

Swing Arc (deg.): 180

Transport Height (in): 83.5

Bucket Rotating (deg.): 180

Stabilizer Spread(Down position) (in): 68.7

Stabilizer Spread(Up position) (in): 46.5

Bucket Digging force (lbs): 2,673

 

COMPATIBLE WITH

XR3135-35HP

XR3135H-35HP

XR3135C-35HP

XR3135HC-35HP

LB2105

Digging Depth (in): 89.8

Reach from centerline of swing Pivot (in): 125.2

Loading Height (in): 72.4

Swing Arc (deg.): 180

Transport Height (in): 83.5

Bucket Rotating (deg.): 180

Stabilizer Spread(Down position) (in): 68.7

Stabilizer Spread(Up position) (in): 46.5

Bucket Digging force (lbs): 2,673

COMPATIBLE WITH

XR4140-40HP

XR4140H-40HP

XR4140C-40HP

XR4140HC-40HP

XR4145-45HP

XR4145H-45HP

XR4145C-45HP

XR4145HC-45HP

XR4150-50HP

XR4150H-50HP

XR4150C-50HP

XR4150HC-50HP

XR4155-55HP

XR4155H-55HP

XR4155C-55HP

XR4155HC-55HP

 

 

LB3101

Digging Depth (in): 94.4

Reach from centerline of swing Pivot (in):136.1

Loading Height (in): 80.3

Swing Arc (deg.): 180

Transport Height (in): 92.9

Bucket Rotating (deg.) 180

Stabilizer Spread(Down position), (in): 68.7

Stabilizer Spread(Up position) (in): 46.4

Bucket Digging force (lbs): 3,748

 

 

LB3102

Digging Depth (in): 94.5

Reach from centerline of swing Pivot (in.): 136.2

Loading Height (in): 80.3

Swing Arc (deg.): 180

Transport Height (in): 92.9

Bucket Rotating (deg.): 180

Stabilizer Spread(Down position) (in): 68.7

Stabilizer Spread(Up position) (in): 46.5

Bucket Digging force (lbs): 3,740

 

COMPATIBLE WITH

XU6158-58HP

XU6158C-58HP

XU6168-68HP

XU6168C-68HP

XU6168CPS-68HP

 

 

 

LB3103

Digging Depth (in): 94.4

Reach from centerline of swing Pivot (in.): 136.1

Loading Height (in): 80.3

Swing Arc (deg.): 180

Transport Height (in): 92.9

Bucket Rotating (deg.): 180

Stabilizer Spread (Down position) (in): 68.7

Stabilizer Spread (Up position) (in): 46.4

Bucket Digging force (lbs): 3,748

 

 

LB3104

Digging Depth (in): 94.4

Reach from centerline of swing Pivot (in.): 136.1

Loading Height (in): 80.3

Swing Arc (deg.): 180

Transport Height (in): 92.9

Bucket Rotating (deg.): 180

Stabilizer Spread(Down position) (in): 68.7

Stabilizer Spread(Up position) (in): 46.4

Bucket Digging force (lbs): 3,748

 

COMPATIBLE WITH

XR4140-40HP

XR4140H-40HP

XR4140C-40HP

XR4140HC-40HP

XR4145-45HP

XR4145H-45HP

XR4145C-45HP

XR4145HC-45HP

XR4150-50HP

XR4150H-50HP

XR4150C-50HP

XR4150HC-50HP

XR4155-55HP

XR4155H-55HP

XR4155C-55HP

XR4155HC-55HP

LM1160

Cutting Width (in.): 60

Overall Width (in.): 75.6

Cutting Height Range (in.): 4

Deck Shell Thickness (in.): 0.126

Spindle Speed at 3000 RPM: 2,786

Blade Tip Speed (ft./min.): 14.932

Number of Blades: 3

Blade Length (in.): 20.5

Blade Width (in.): 2.48

Blade Thickness (in.): 0.236

Shipping Weight of Base 60” Deck (lbs.): 284.4

COMPATIBLE WITH

MT122-21.5HP

MT125-24.7HP

 

 

LM1472

Cutting Width (in.): 72

Overall Width (in.): 76

Discharge: rear discharge

Weight, Machine (lbs.): 661

Max. PTO-hp, not to exceed 40HP

Cutting Height (in.): 3/4 to 4 3/4

Deck Materia (in.): 3/16

Blades Sizes (in.): 2 3/8 x 1/4 x 25

Blade Overlap (in.): 1 3/16

Blade RPM: 2,160

Hitch: Cat-1

COMPATIBLE WITH

MT230E-30HP

XR3135-35HP

XR3135H-35HP

XR3135C-35HP

XR3135HC-35HP

LM1484

Cutting Width (in.): 84

Overall Width (in.): 86

Discharge: rear discharge

Weight, Machine (lbs.): 728

Max. PTO-hp, not to exceed 60HP

Cutting Height (in.): 3/4 to 4 3/4

Deck Material (in.): 3/8

Blades Sizes (in.): 2 3/8 x 1/4 x 28 3/4

Blade Overlap (in.): 1 3/16

Blade RPM: 2,160

Hitch: Cat-1

COMPATIBLE WITH

XR4140-40HP

XR4140H-40HP

XR4140C-40HP

XR4140HC-40HP

XR4145-45HP

XR4145H-45HP

XR4145C-45HP

XR4145HC-45HP

XR4150-50HP

XR4150H-50HP

XR4150C-50HP

XR4150HC-50HP

XR4155-55HP

XR4155H-55HP

XR4155C-55HP

XR4155HC-55HP

XU6158-58HP

XU6158C-58HP

XU6168-68HP

XU6168C-68HP

XU6168CPS-68HP

 

 

LM3560

Cutting Width (in): 60

Overall Width (in): 74

Cutting Height Range (in): 1 to 4-1/8

Deck shell Thickness (in): 10-Gauge (0.1345 in.) Grade 50 steel

Spindle Speed at 2000 RPM: 2,842 RPM

Blade Tip Speed (ft./min): 18,000

Number of Blades: 3

Blade Length (in): 21

Blade Width, in. 2-1/2

Blade Thickness (in): 1/4

Shipping Weight of Base 60” Deck (lbs): 450

COMPATIBLE WITH

XJ2025-24.4HP

XJ2025H-24.4HP

LW3168

Overall width (with side extensions), inches: 68

Cutting width, inches: 68

Cutting height, inches: 23

Impeller drive: Gear box

Auger drive: Worm gear

Auger diameter, inches: 13 3/4

Impeller diameter, inches: 17 5/8

Number of blades on impeller: 4

Chute rotation: hydraulic

Adjustable heavy skid shoes: yes, 3 positions, 0”, 1/2”, 1”

Auger shear bolt protection: Yes

Impeller shear bolt protection: Yes

Approx. shipping weight, lbs: 500

 

 

LW3168 A

Overall width (with side extensions), inches: 68

Cutting width, inches: 68

Cutting height, inches: 23

Impeller drive: Gear box

Auger drive: Worm gear

Auger diameter, inches: 13 3/4

Impeller diameter, inches: 17 5/8

Number of blades on impeller: 4

Chute rotation: hydraulic

Adjustable heavy skid shoes: yes, 3 positions, 0”, 1/2”, 1”

Auger shear bolt protection: Yes

Impeller shear bolt protection: Yes

Approx. shipping weight, lbs: 500

COMPATIBLE WITH

XR3135-35HP XR3135H-35HP XR3135C-35HP XR3135HC-35HP

 

LW3174

Overall width, inches: 74

Cutting width, inches: 74

Cutting height, inches: 26

Impeller drive: Gear box

Auger drive: #60 chain

Auger diameter, inches: 14 3/4

Impeller diameter, inches: 23 3/4

Number of blades on impeller: 4

Chute rotation: hydraulic

Adjustable heavy skid shoes: yes, 3 positions, 0”, 1/2”, 1”

Auger shear bolt protection: Yes

Impeller shear bolt protection: Yes

Approx. shipping weight, lbs: 874

LW3174 A

Overall width, inches: 74

Cutting width, inches: 74

Cutting height, inches: 26

Impeller drive: Gear box

Auger drive: #60 chain

Auger diameter, inches: 14 3/4

Impeller diameter, inches: 23 3/4

Number of blades on impeller: 4

Chute rotation: hydraulic

Adjustable heavy skid shoes: yes, 3 positions, 0”, 1/2”, 1”

Auger shear bolt protection: Yes

Impeller shear bolt protection: Yes

Approx. shipping weight, lbs: 874

COMPATIBLE WITH

XR4140-40HP XR4140H-40HP XR4140C-40HP XR4140HC-40HP XR4145-45HP XR4145H-45HP XR4145C-45HP XR4145HC-45HP XR4150-50HP XR4150H-50HP XR4150C-50HP XR4150HC-50HP XR4155-55HP XR4155H-55HP XR4155C-55HP XR4155HC-55HP

 

LW4164

Working Width (in.): 64

Working Height (in.): 26

Auger: Single

Auger Diameter (in.): 15

Impeller Diameter (in.): 24

Number of Impeller Blades: 4

Skid Shoe: Adjustable

Hitch Category: Cat. 1

HP Requirements – min-max (hp): 20-50

Tractor RPM: 540

Approximate Shipping Weight (lbs): 533

COMPATIBLE WITH

XR3135-35HP XR3135H-35HP XR3135C-35HP MT235E-35HP XR3135HC-35HP MT235HE-35HP MT240E-40HP MT240HE-40HP XR4140-40HP XR4140H-40HP XR4140C-40HP XR4140HC-40HP XR4145-45HP XR4145H-45HP XR4145C-45HP XR4145HC-45HP XR4150-50HP XR4150H-50HP XR4150C-50HP XR4150HC-50HP XR4155-55HP XR4155H-55HP XR4155C-55HP XR4155HC-55HP

 

LS3150

Overall width (in): 50

Cutting width (in): 49 3/4

Cutting height (in): 20

Impeller drive: Chain #40

Auger drive: Worm gear

Auger diameter (in): 12 3/4

Impeller diameter (in): 15 3/4

Number of blades on impeller: 3

Chute rotation: Manual (Hydraulic Optional)

Adjustable heavy skid shoes: yes

Auger shear bolt protection, yes

Impeller shear bolt protection: yes

Approx. shipping weight (lbs): 350

COMPATIBLE WITH

XJ2025-24.4HP XJ2025H-24.4HP

MLG3060

Recommended PTO HP: 18-55

3 point hitch type: Cat 1 quick hitch

Working width (in.): 60″

Overall width (in.): 64.25″

Overall length (in.): 24″

Box height (in.): 16.5″

Capacity (cu. ft.): 14.72

Weight (lb): 463

COMPATIBLE WITH

XJ Series MT2E Series

 

MLG3072

Recommended PTO HP: 25-55

3 point hitch type: Cat 1 quick hitch

Working width (in.): 72″

Overall width (in.): 76″

Overall length (in.): 24″

Box height (in.): 16.5″

Capacity (cu. ft.): 17.6

Weight (lb): 499

COMPATIBLE WITH

MT2E Series XR Series

MLG5084

Recommended PTO HP: 40-80

3 point hitch type: Cat 2 quick hitch

Working width (in.): 84″

Overall width (in.): 88.5″

Overall length (in.): 24″

Box height (in.): 16.5″

Capacity (cu. ft.): 20.28

Weight (lb): 578

COMPATIBLE WITH

XU Series XP Series

klsjdajsdhaksjdhasj

The T264’s superior quality front axle delivers an extremely tight turning radius with full power transfer to the wheels at every steering angle.

klsjdajsdhaksjdhasj

The Hydrostatic transmission, with 2 range speed controls, provides a comfortable and easy forward and reverse motion.

klsjdajsdhaksjdhasj

The T264’s Category 1 3-Point hitch has a lifting capacity of 1,534 lbs, allowing for a wide variety of implements.

klsjdajsdhaksjdhasj

The T264’s hydraulic power steering makes turning easier with improved controls, reducing your operating fatigue and allowing for more hours on the job.

klsjdajsdhaksjdhasj

Allows you to perform all loader function with joystick lever.

klsjdajsdhaksjdhasj

The PTO switch is conveniently located on the dashboard, allowing for a simple push and turn to start the independent rear PTO and a single push thereafter to stop.

klsjdajsdhaksjdhasj

With a full flat deck and brakes on the left hand side, the T264 provides more leg room and less clutter for the operator.

klsjdajsdhaksjdhasj

The T264 ROPS can be stored easily into low clearance buildings or sheds with our foldable ROPs design.

klsjdajsdhaksjdhasj

Added filter protects the engine from harmful particles and drastically extends average engine life.

klsjdajsdhaksjdhasj

The T264 sports a 6.6 gallon large capacity fuel tank for long operational hours.

klsjdajsdhaksjdhasj

The T264 comes with the option of a fully heated cabin for those cold winter mornings.

klsjdajsdhaksjdhasj

With the press of a easy access lever, you can quickly and easily open your hood for daily service and maintenance checks.

klsjdajsdhaksjdhasj
klsjdajsdhaksjdhasj

The lift capacity of 2646 lbs provides sufficient power to control the rear implement and the position level sets the height of the implement just as you want it.

klsjdajsdhaksjdhasj

Double acting power steering system gives a smoother and effortless turn and its solid front axle provides utmost satisfaction in any type of ground work.

klsjdajsdhaksjdhasj

The T394 CAB model comes standard with full heat and a new and improved air filtration system. The T394 is available in cabin models that have full A/C and heat

klsjdajsdhaksjdhasj

Hydrostatic transmission with a 3 range speed control provides comfortable and easy operating conditions.

klsjdajsdhaksjdhasj

Conveniently located PTO on and off switch with the light indicator enables you to control the PTO at your finger tips.

klsjdajsdhaksjdhasj

Factory Installed joystick lever and remote valves for front attachment is standard in T354 and its family model.

klsjdajsdhaksjdhasj

Control levers are ergonomically located by considering the operator’s hand movements.

klsjdajsdhaksjdhasj

The T394 CAB comes equipped standard with two front work lamps and one rear lamp, providing the light you need for those important night missions.

klsjdajsdhaksjdhasj

The T394 comes equipped with hydraulics and an easily accessible pull pin to allow for a quick and easy way to maintenance your tractor.

klsjdajsdhaksjdhasj

Radiator screen is easily taken out without any tool for cleaning dust.

klsjdajsdhaksjdhasj

The T394 offers front and rear windshield wipers in order to keep you going through even the toughest weather.

klsjdajsdhaksjdhasj

The digital instrument panel provides a clear display for engine errors, gas gauge, as well as speed(rpm).

HST

klsjdajsdhaksjdhasj

SYNCHRO SHUTTLE

klsjdajsdhaksjdhasj
klsjdajsdhaksjdhasj